Equal Angle
  • Tested high tensile strength and yield strength make Tulshayn Metal Angles to perform better than others.
  • Balanced chemical composition is a guarantee of uniform quality for designers and high order of weldability for fabricators. State – of – the art technology for manufacturing and testing assures users about physical properties like bendablity and formablity along with creep and fatigue endurance in Tulshyan Metals Angles.
  • Rigorous incoming material test, stage inspection and final inspection along with careful handling of Tulshayn Metals Angles make them defect-free.
  • Automatic control of parameters & work conditions permit us to supply finished products in desired technical supply conditions (i.e. refined & dense grains, good microstructures and freedom from thermal /mechanical stress.)
  • Optimum ductility & bendablity essentially save energy in welding & offer ease in fabrication.

 

Thickness (mm)
LEG (mm) 4 5 6 7 8 10 12 16 20
ISA 35×35 2.1 2.6 3.0
ISA 40×40 2.4 3.0 3.5
ISA 45×45 2.7 3.4 4.0
ISA 50×50 3.0 3.8 4.5 5.15
ISA 55×55 3.3 4.1 4.9 6.4 7.9
ISA 60×60 3.7 4.5 5.4 7.0 8.6
ISA 65×65 4.0 4.9 5.8 7.7 9.4
ISA 70×70 5.3 6.3 7.38 8.3 10.2
ISA 75×75 5.7 6.8 8.9 11.0
ISA 80×80 7.3 9.6 11.8 14.0
ISA 90×90 8.2 10.8 13.4 15.8
ISA 100×100 9.2 10.7 12.1 14.9 17.7
ISA 110×110 13.4 16.6 19.7 25.7
ISA 130×130 15.9 19.7 23.5 30.7
ISA 150×150 22.9 27.3 35.8 44.1

Rolling and Cutting Tolerance

LEG LENGTH SECTIONAL WEIGHT LENGTH
Up to 45 mm: +/- 1.5 mm FOR FIX LENGTH
45 to 100 mm:+/- 2 mm over 3 mm :+5% -3% :+/- 100 MM
above 100 mm:+/- 2 %

Chemical Composition

GRADE C % Mn % S % P % Si % CE VALUE
MS E-250 A 0.23 1.50 0.045 0.045 0.40 0.42
HT E-350 A 0.20 1.55 0.045 0.045 0.45 0.47
Tolerance 0.02 0.05 0.005 0.005 0.03 0.03

Mechanical Properties

Tensile Strength Yield Stress % Elongation at> Bend Test
MIN, MPA MIN ,MPA GAUGE LENGTH 5.65 MIN
MM <20 20-40 >40 MIN
MS E-250 A 410 250 240 230 23 2t
HT E-350 A 490 350 330 320 22 2t
Tolerance
Weight Calculator

Width(in mm)

Thickness(in mm)

Length(in Mtr)